In DynaScape Design, prototype drawings contain layers designated for temporary elements used during the drafting process. Reference lines drawn in the detail layer or Quick Text notes are examples of temporary elements that do not necessarily appear in the final draft of the drawing presented to the client.
DynaScape has several Modes that will only show a single layer. By using layers that have a corresponding single-layer mode, you can isolate objects drawn on that layer to view, modify or remove them.
The following layers are intended for temporary elements and can be isolated using a corresponding Mode:
1. The Temp Layer can be isolated using the Temp_Mode.
2. The Quick Text Layer can be isolated using the Quick Text_Mode.